Loading ...
Loading ...
Loading ...
■ Ensure your skin is free of oils.
■ Wait at least 15 minutes after getting up before shaving, to ensure your face is
free of puffiness that may be present from sleeping.
■ Always hold the shaver at a right angle to the skin so that the screens are
touching the skin with equal pressure.
■ Stretch skin with the free hand so hairs stand upright, making it easier for them
to enter the cutting chamber.
■ Use moderate to slow, circular stroking movement.
■ The use of short, circular motions in stubborn areas may obtain a closer shave,
especially along the neck and chin line.
■ Do not press hard against the skin to avoid skin irritation and/or damage to the
shaver head.
We recommend that you use your new shaver daily for up to four weeks to
allow time for your hair and skin to become accustomed to the
new shaving system.
Shaving Tips (Dry)
The shaver is a wet/dry appliance. The shaver may be
cleaned under warm water.
Cleaning and Care
When your rechargeable shaver reaches the end of its useful life, the LiFePO
4
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
by law, you may elect to dispose of the shaver with the batteries.
CAUTION! Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1. Unplug the shaver
2. Run shaver until the motor stops
3. Using a small screwdriver, carefully pry off the front panel of the handle housing.
4. Using a Phillips screwdriver remove the screws from the front of the inner
housing and remove the cover.
5. Lift the circuit board out of the inner housing to expose the battery.
6. Cut the wire connecting the batteries to the circuit board and remove the
batteries.
7. The battery is to be disposed of safely.
Product Disposal
NOTE: When cleaning your shaver, make sure the shaver is turned off
and disconnected from the power cord.
CAUTION!
■ To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
■ To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
Note: Lubricate cutters after rinsing.
How to Order Shaver Accessories
Please refer to the shaver comparison and features chart near the front of
this manual that lists the correct replacement part number for your shaver.
It is very important to replace your head and cutters when necessary to ensure
a close, comfortable shave without irritation. We recommend they be replaced
every 6 months. Here are some signs of head and cutter wear, indicating that
replacement is needed:
■ Irritation: As the heads get excessively worn you may experience some skin
irritation. This would be especially noticeable when you apply moisturizing lotion.
■ Pulling: When the cutters wear you may feel a sense of pulling and a loss of
closeness when you shave. This is an indication that it is time to replace your
heads and cutters.
Maintain your shaver’s peak performance!
Keep Your Shaver Performing Like New!
■ Because your satisfaction is important to us, we want to make it simple for you
to keep your new shaver performing at its peak.
■ For the best possible shave, it is necessary to replace the heads and cutters on
your shaver every 6 months.
■ Remington makes this easy!
Two Easy Ways to Order!
1. Call! 1-800-392-6544
2. Order Online at RemingtonProducts.com
Limited Three-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a three-year period from the original date of
consumer purchase. This warranty does not include damage to the product resulting
from accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to: Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532
. For more information call 800-736-4648
in the U.S. or Canada.
Warranty excludes:
■ Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
THREE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc.
Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the U.S. or Canada.
Warranty
Performance Guarantee
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, return it with the original dated sales receipt
directly to Remington and receive a full refund.** For questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4–6 weeks to receive your refund by check.
Questions or comments:
Call 800-736-4648 in the U.S. or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
120/240 VAC, 50/60 Hz TYPE: XF8505
® Registered Trademark of Spectrum Brands, Inc.
©2019 Spectrum Brands, Inc. 3/19 25343
Made in China.
T22-7001001-A
Contains a
Listed Adaptor
Cleaning Your Shaver
Note: We recommend following these steps after each use.
1. Pull off Stubble attachment/Head guard, if using, and rinse
attachment.
2. Remove the foil assembly by pressing the release buttons on
both sides of the head and lifting the foil assembly upwards to
remove from the hair pocket. (Diagram F)
3. Tap out excess hair shavings.
4. Rinse the head of the assembly under running water.
(Diagram G)
5. Replace the head assembly by placing the assembly on top of
the hair pocket, press down and click into place. (Diagram H)
6. Reattach the Stubble attachment/Head guard to protect the
shaving head until next use.
Note: Lubricate teeth of trimmer with oil every six months.
Shaving Tips With Gel or Foam (In Shower or Over the Sink)
We recommend that you use the shaver in the shower for optimal performance.
NOTE: In order to ensure optimal performance, thoroughly rinse the shaver
head under water during and after shaving.
1. Apply water to face and neck area.
2. Apply shave gel or foam to applicable shaving area.
3. Rinse shaver head under water.
4. Shave face and neck using short, circular strokes.
5. Throughout the shave, regularly rinse shaver head under water to avoid residue
build up.
6. When finished shaving, rinse face.
7. Thoroughly rinse shaver head of all gel or foam.
8. Follow Cleaning and Care instructions.
H
F
G
Loading ...
Loading ...
Loading ...