CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
CORDLESS
HAIRCUT KIT
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Do not use attachments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Make sure the cord is disconnected
from the clipper while storing this appliance
and cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■ Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance, then adapter to outlet. To disconnect, turn all
controls to OFF, then remove adapter from outlet, then detach power cord from
the clipper for storage.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s)
in your area.
HC9000
Use and Care Guide
HC9000 REMINGTON CORDLESS HAIRCUT KIT
Thank you for purchasing your new Remington
®
Haircut Kit. Inside this manual
you will find tips on using and caring for your hair clipper.
1. On/Off Switch
2. Comb Length Setting Indicator
3. Adjustable Comb (3-15mm)
4. Adjustable Comb (18-30mm)
5. Integrated Hair Texture Function
6. Comb Length Adjustment Wheel
7. Charging Indicator Light
Also Includes:
• Scissors
• Barber Comb
• Travel Pouch
• Lubricating Oil
• Cleaning Brush
• Power Adaptor
KEY PARTS
3
2
4
5
6
7
1
HC9000 SPECIFICATIONS
Power System Cord/Cordless
Full Charge Time 16 Hours
Run Time 45 Minutes
Indicators Charging
Worldwide Voltage Yes
Power System
Cord/Cordless – can be used with or without the power cord.
Charging Indicator
Red light that glows when the hair clipper is being charged.
Voltage Type
Worldwide Voltage – automatically adapts to an outlet voltage between 100-240V.
CHARGING YOUR CLIPPER
Cordless Use
• Before using your hair clipper for the first time, charge it for 16 hours.
Run time from fully charged is up to 45 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the power
outlet. The charging LED light will display on the clipper.
• If the product is not going to be used for an extended period time (2-3
months), unplug it from the power outlet and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged. However, while using the hair
clipper in cordless mode, if there is a noticeable drop in power, you
can use the hair clipper directly from the power outlet.
• To preserve the life of your batteries, let them run out every six
months then recharge for 24 hours.
Corded Use
• Connect the charging adaptor to the product and then to the power outlet.
• When the cord is connected to the power outlet, a charging LED light
is displayed on the hair clipper.
• CAUTION: Extended corded-only use will result in reduced battery life.
PRODUCT FEATURES
HOW TO USE
Before Starting to Cut
1. Inspect the hair clipper making sure that it is free from hair and dirt.
2. Ensure that the hair is thoroughly dry and tangle free.
3. The blades on your hair clipper should be oiled before every haircut.
Lubricating the Hair Clipper Blades
Place a few drops of oil on the teeth of the blades. Use only the light grade
oil supplied or a suitable alternative like sewing machine oil. Do not use hair
oil, grease or any oil mixed with kerosene or any solvent as the solvent will
evaporate and leave the thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may
cause cutting problems. Blades will wear prematurely and not cut properly if they
are not sufficiently lubricated. There may also be a pulling sensation on the hair.
Instructions for Hair Cutting
NOTE: For even cutting, allow the trimmer comb/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the rst time, start
with the maximum length trimmer comb, until you know how short you would
like your hair to be.
Comb Settings
MARK
LENGTH SETTING
Comb 1 - Short Comb 2 - Long
1 3mm 18mm
. 4.5mm 19.5mm
3 6mm 21mm
. 7.5mm 22.5mm
5 9mm 24mm
. 10.5mm 25.5mm
7 12mm 27mm
. 13.5mm 28.5mm
9 15mm 30mm
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
PRODUCT DISPOSAL
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following procedure should be followed for battery removal:
■ Ensure device is unplugged from any electrical outlet.
■ Remove screws from back housing.
■ Pull housings apart.
■ Remove internal structure to access batteries.
■ Remove batteries from circuit board.
THIS DEVICE USES EITHER NICKEL METAL HYDRIDE (NiMH), OR NICKEL CADMIUM
(Ni-Cd) RECHARGEABLE BATTERIES (see side of removed battery for indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. Do
not put in fire or mutilate, as the battery may burst or release toxic materials. Do
not short-circuit, as this may cause burns.
Spectrum Brands, Inc. is a proud participant in the EPA-approved Rechargeable
Battery Recycling Call2Recycle
SM
, which collects and recycles these batteries
at the end of their useful life when taken out of services in the United States or
Canada. The RBRC
®
program provides a convenient alternative to placing used
batteries into the trash or the municipal waste stream, which may be illegal in
your area. Please call 1-800-8-BATTERY
SM
or visit www.call2recycle.org for infor-
mation on battery recycling and disposal bans/restriction in your area. Spectrum
Brands, Inc.’s involvement in this program is part of our commitment to preserv-
ing our environment and conserving our natural resources.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S. or
Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240VAC 50/60Hz
Type: HC9000
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22366
Made in China.
T22-7000328-A
WARRANTY
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will replace it
free of charge. Return your product with your name, address and day time phone
number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI
53532. For more information call 800-736-4648 in the U.S. and Canada.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. and Canada.
Contains a
listed adaptor
HOW TO USE (CONTINUED)
NOTE: The comb guide lengths described for use in the steps below are an
example only, if you want a longer or shorter hair cut you will need to adjust
the comb guide lengths to suit your requirements.
Step 1 - Nape of the Neck
1. Use 3mm or 6mm setting.
2. Hold the hair clipper with the blade teeth pointing upwards. Begin starting
at the center of the head at the base of the neck.
3. Slowly lift the hair clipper, working upwards and outwards through the
hair, trimming just a little at a time.
Step 2 - Back and Side of the Head
With the 9mm or 12mm setting in place, cut the hair at the back and sides of
the head using upward strokes.
Step 3 - Sideburns
With the 9mm or 12mm setting in place, trim sideburns.
Step 4 - Top of the Head
1. With the setting of your choice, cut the hair on top of the head against the
direction in which the hair normally grows.
2. For longer hair on top, use scissors. Lift the hair on top of the head with
styling comb. Cut over the styling comb with the hair lifted or hold the hair
between the fingers to lift it and cut it to the desired length.
3. Always work from the back of the head.
Step 5 - The Finishing Touches
1. Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2. To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.
CLEANING AND MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades and
unit regularly.
NOTE: Ensure that the hair clipper is turned off and unplugged when cleaning.
After Each Use
1. Ensure the hair clipper is switched off and disconnected from the power
outlet household power outlet.
2. Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3. To clean the body of the unit, wipe with a damp cloth and dry immediately.
4. Gently brush the remaining hairs away from the hair clipper comb and hair
clipper blade.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1. Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2. Remove the comb attachment.
3. Hold the hair clipper in one hand so that the blades are at the top, and the
front of the hair clipper is facing you.
4. Place your thumb of the opposite hand underneath the blades at the front
of the unit, hold the back of the blade set with your fore finger and middle
finger and firmly press upwards with your thumb. The blade set will
detach from the hair clipper.
5. Brush the accumulated hair from the hair pocket and blades.
6. Replace the blade set by inserting the notch (on the inside at the bottom of
the blade set) into the groove of the hair pocket and firmly push down with
the palm of your hand until you hear an audible ‘click’ and the blade set is
locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children in
a safe dry place. Never wrap the cord around the hair clipper as this will cause
the cord to wear prematurely and break. Handle the cord carefully for long life
and avoid jerking, twisting or straining especially at the plug connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Clipper section.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
