Loading ...
Loading ...
Loading ...
Page 25
Installation and Operation Manual - Black Stag II
ENGLISH
ALIGNEMENT DES PORTES
Pour effectuer l’alignement, ouvrir la porte de l’appareil et dévissez légèrement les vis de pressions situés
sur les gonds de porte inférieur et supérieur à l’aide d’une clef Allen 3/32" pour libérer les tiges pentures
ajustables.
3/32"
À l’aide d’un tournevis plat, tourner les tiges de pentures ajustables dans les sens indiqués pour ajuster
les portes. Resserrez toutes les vis de pression sur les gonds de portes lorsque ces dernières sont aux
positions désirées. Les configurations 1-2-3-4-5-6, indiquent dans quel direction celles-ci agissent sur
l’ajustement de la porte
4
2
A
B
1
3
5
6
6.5 Exhaust System
Wood smoke can condense inside the chimney, forming a inflammable deposit called creosote.
If creosote builds up in the system, it can ignite when a hot fire is burned in the stove. A very
hot fire can progress to the top of the chimney. Severe chimney fires can damage even the best
chimney. Smouldering, smoky fires can quickly cause a thick layer of creosote to form. When
the stove is operated properly, the exhaust from the chimney is mostly clear and creosote builds
up more slowly.
«Creosote - Formation and Need to Removal
When wood is burned slowly, it produces tar and other organic vapors, which combine with
expelled moisture to form creosote. The creosote vapors condense in the relatively cooler
chimney flue of a slow-burning fire. As a result, creosote residue accumulates on the flue
lining. When ignited, this creosote makes an extremely hot fire.
The chimney connector and chimney should be inspected at least once every two months
during the heating season to determine if a creosote buildup has occurred.
If a significant layer of creosote has accumulated (⅛" [3mm] or more) it should be removed
to reduce the risk of a chimney fire.»
6.5.1 Cleaning Frequency
It is not possible to predict how much or how quickly creosote will form in the chimney. It is
important, therefore, to check the build-up in the chimney monthly until the rate of creosote
formation is determined. Even if creosote forms slowly in the system, the chimney should be
cleaned and inspected at least once each year.
Establish a routine for the fuel, wood burner and firing technique. Check daily for creosote
build-up until experience shows how often you need to clean to be safe.
Loading ...
Loading ...
Loading ...