Loading ...
Loading ...
Loading ...
ML Power 5
Advanced Web Manual
EN
9
9. FRONT AND REAR PANELS
A PRE-IN: Left and Right pre-amplified inputs to drive
A channels. Connect to pre-amplified source output.
Signal can be 0.2 to 5V RMS.
B PRE-IN: Left and Right pre-amplified inputs to drive B
channels. Connect to pre-amplified source output. Signal
can be 0.2 to 5V RMS (input active on 5CH mode only).
SUB PRE-IN: Pre-amplified L+R (mix) inputs for drive
SUB channel. Connect to pre-amplified source output.
Signal can be 0.2 to 5V RMS.
A HI - IN: Hi-Level signals Left and Right inputs for
A channels. If the head unit does not feature a pre-
amplified output, connect here its speaker wire to drive A
Left and Right channels. Signal can be 0.8 V to 20 V RMS.
B HI - IN: Hi-Level signals Left and Right inputs for
B channels. If the head unit does not feature a pre-
amplified output, connect here its speaker wire to drive
B Left and Right channels (input active on 5CH mode only).
Signal can be 0.8 V to 20 V RMS.
B INPUT (A - B): Select A to drive B channels with A input
signals. With this setup, do not connect B input. If the
source features a REAR output, select B and connect
its signals to B input (B PRE-IN or B HI-IN).
HI - IN AUTO TURN-ON (ON - OFF): Select ON to turn on
the amplifier through the speaker power cable, if the
source does not feature a 12V DC REMOTE OUT. Select
OFF if REMOTE OUT from source is available.
SUB HI - IN: SUB channel Hi-Level signal inputs. If the
head unit does not feature a pre-amplified output,
connect here its speaker wire to drive SUB channel.
Signal can be 0.8 V to 20 V RMS.
REMOTE VOLUME CONTROL: Input for REMOTE SUB
VOLUME CONTROL. Connect here the adjustment
control the amplifier features (optional).
SUB INPUT (A+B SUB): Select A+B to drive SUB channel
with A signals and B signals. With this setup, do not
connect SUB input. If the source features a SUB output,
select SUB and connect its signals to SUB input.
PROTECTION FUSE: 2 x 40A.
POWER (+ BATT): Terminal block for the amplifier 11 รท
15 V DC power supply positive pole connection. Insert
here the battery positive cable. The plug accepts cables
up to 2 A.W.G.
REMOTE IN: REMOTE IN terminal for the remote cable
coming from the device which turns on the amplifier.
Voltage must be between 7 and 16V DC.
POWER (GND): Terminal block for the amplifier power
supply negative pole connection. Insert here the
battery negative cable or wire connected to the vehicle
chassis. The plug accepts cables up to 2 A.W.G.
SUB Speaker OUT: Subwoofer + and - power terminal.
BL Speaker OUT: B channel Left speaker + and - power
terminal. For 3CH mode, connect the Left speaker
negative terminal to BL- terminal.
BR Speaker OUT: B channel Right speaker + and - power
terminal. For 3CH mode, connect the Left speaker
positive terminal to BR+ terminal.
AL Speaker OUT: A channel Left speaker + and - power
terminal. For 3CH mode, connect the Right speaker
negative terminal to AL - terminal.
AR Speaker OUT: A channel Right speaker + and - power
terminal. For 3CH mode, connect the Right speaker
positive terminal to AR + terminal.
1
7
8
9
10
11
12
13
14
15
16
17
18
19
2
3
4
5
6
1
2 3
1312 1411
8 9765
1615 17 18 19
4
10
Loading ...
Loading ...
Loading ...