Loading ...
Loading ...
Loading ...
W415-1900 / E / 02.07.20
EN
10
installation
2.3 minimum clearance to combustibles
2.4 minimum mantel clearances
2.2 grounding appliance
Grounding Methods
Metal Screw
(A)
Not allowed in Canada
Grounding Means
Adapter
Grounding Pin
Cover of
grounded
outlet box
(C)
(B)
This appliance is for use on 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot receptacles, as shown in (B).
The green grounding plug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
The appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
note:
Clearance to Combustibles
Combustibles to top
0”
Combustibles to bottom
0"
Combustibles to sides
0"
Combustibles to back
0"
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
!
WARNING
Side View (Wall Mount)
2" (51mm)
Mantel
Although this appliance is safe to operate with a
0" mantel height, a 2" (51mm) gap between the
appliance and the mantel is recommended in order
to lift the appliance on/off the rear wall bracket
hooks.
note:
Loading ...
Loading ...
Loading ...