Loading ...
Monthly Cleaning:
1. Perform the daily
cleaning steps 1-4.
2. Place a drop of
liquid soap on
each cutter and
in the hairpocket.
(Diagram M)
3. Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the
hairpocket and into
any especially dirty
cutters.
(Diagram N)
4. Add a small amount
of water to the
cutters.
5. Replace the foil
assembly.
(Diagram O)
6. Turn on the shaver
for approximately
30 seconds.
7. While the shaver is running, rinse
the foils under running water.
(Diagram P)
8. Turn off shaver.
9. Remove foil assembly.
10.Rinse the cutters, hairpocket,
and foil assembly thoroughly.
(Diagram Q)
11. Shake off excess water.
12. Replace foil assembly. (Diagram O)
13. Allow shaver to dry before next
use and attach the Stubble comb/
Head guard.
■Do not remove or replace head
assembly while shaver is running
as it may cause damage to the
unit’s foils and cutters.
■To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
■To dry, wipe the surface of the
shaver with a dry towel. Do not
use a hair dryer or heater to dry
the shaver.
■The shaver should not be used until
it has dried.
■Lubricate each cutter with
household oil.
■This product contains no user
serviceable parts.
The shaver is a
wet/dry appliance.
The shaver may
be cleaned under
warm water.
Trim
Cleaning and Care
NOTE: When cleaning your shaver,
make sure the shaver is turned off
and disconnected from the power
adapter.
For optimal shaver performance,
clean your shaver after each use.
CAUTION!
■Shaver can be placed under running
water for cleaning only. Never
submerge the shaver in water.
1. Slide trimmer release button
up to engage the trimmer.
(Diagram F)
2. Trim long, difficult hairs and
side burns.
(Diagram G)
3. Close trimmer by sliding the
button down. (Diagram H)
Daily Cleaning:
1. Pull off Stubble comb/Head guard, if
using, and rinse attachment.
2. Grasp the front
and back of the
cutter assembly
and pull away from
the shaver body.
(Diagram I)
3. Tap the stubble
from the foils and
cutters.
4. Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside
the hairpocket.
(Diagrams J–K)
5. Rinse head under running water.
6. Gently dry with towel or leave
disassembled to air dry.
7. Replace hair pocket assembly when
dry. (Diagram L)
8. Reattach the Stubble comb/Head
guard to protect the shaving head
until next use.
When your rechargeable shaver reaches
the end of its useful life, the batteries
must be removed from the shaver and
recycled or disposed of properly in
accordance with your state and local
requirements. If this is not required by
law, you may elect to dispose of the
shaver with the batteries.
This device uses one of the following
types of rechargeable batteries: nickel
metal hydride (NiMH), nickel cadmium
(Ni-Cd) or Lithium Ion (Li-Ion) (see
included battery for indication of type).
CAUTION: ALL RECHARGEABLE
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCORDANCE
WITH APPLICABLE STATE AND LOCAL
REGULATIONS. DO NOT PUT IN FIRE
OR MUTILATE, AS THE BATTERY
MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT,
AS THIS MAY CAUSE BURNS.
Product Disposal
To Remove the Rechargeable Battery:
1. Remove phillips head screw at the
base of the shaver.
2. Pry the outer sleeve down off the
shaver handle.
3. Pry the back housing cover off the
shaver.
4. Remove screws from inner housing
and open inner housing to expose
the batteries.
5. Snip the battery wires and remove
batteries.
6. Dispose of battery properly.
Maintain your shaver’s peak
performance! Keep your shaver
performing like new!
■Because your satisfaction is
important to us, we want to make
it simple for you to keep your new
shaver performing at its peak.
■For the best possible shave, it is
necessary to replace the heads
and cutters on your shaver every
12 months.
■Remington makes this easy!
Two easy ways to order!
1. Call!
U.S. and Canada residents call
800-392-6544
2. Order Online at
RemingtonProducts.com
Warranty
Limited Three-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship
for a three-year period from the origi-
nal date of consumer purchase. This
warranty does not include damage to
the product resulting from accident or
misuse. If the product should become
defective within the warranty period,
we will replace it free of charge.
Return your product and sales receipt
with your name, address and day
time phone number to: Remington
Returns Center, 507 Stokely Dr., P.O.
Box 1, Deforest, WI 53532. For more
information call 800-736-4648 in the
U.S. or Canada.
Warranty excludes:
■ Foils and cutters
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
This warranty does not cover
products damaged by the following:
■Accident, misuse, abuse or
alteration of the product
■Servicing by unauthorized persons
■Use with unauthorized accessories
■Connecting it to incorrect current
and voltage
■Wrapping cord around appliance
causing premature wear and
breakage
■Any other conditions beyond our
control
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF FITNESS
AND MERCHANTABILITY, ARE LIMITED
IN DURATION TO THREE YEARS FROM
DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state
or province to province. Some states
do not allow the exclusion or limita-
tion of incidental, special or conse-
quential damages.
How To Order Shaver Accessories
Please refer to the shaver compari-
son and features chart near the
front of this manual that lists the
correct replacement part number
for your shaver.
It is very important to replace your
head and cutters when necessary to
ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 12 months. Here
are some signs of head and cutter
wear, indicating that replacement
is needed:
■Irritation: As the heads get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
■Pulling: When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your heads and cutters.
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 60 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are
not completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington
®
and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S.
or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington
®
and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington
®
, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
100-240 VAC, 50/60 Hz
TYPE: F14A, F15A
Questions or comments:
Call 800-736-4648 in the U.S. or Canada or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc.
255 Longside Drive, Unit 101
Mississauga, ON L5W 1L8
REMINGTON is a Registered Trademark of Spectrum Brands, Inc.
© 2019 Spectrum Brands, Inc. 3/19
24671
Made in China.
T22-7000976-A
Contains a
listed adapter
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
F
G
H
L
I
J
K
P
N
O
Q
M