Loading ...
Loading ...
Loading ...
7
Using the Steam Generator for steam ironing
Turn the temperature dial (5) to suit the garment
(see ‘Temperature guide’ on page 6). The
temperature indicator light (7) illuminates until
the temperature is reached. Begin ironing when
the temperature indicator light goes out. If you
turn the temperature dial down, wait until the
temperature indicator light illuminates and then
goes off again.
Plug the appliance into a mains outlet, you will
hear a beep. Press the On/Off button
(31), it will
beep again and the power indicator light (26)
will illuminate and the low steam level indicator
light (27) will flash.
2
When steam ironing, remove the detachable
water tank (15), lift the filling cap (9), and fill with
water to the max fill line. Replace the water tank.
IMPORTANT: Never fill the dirty water
chamber
(10)
.
1
3
Unlock the iron from its storage position on top
of the base unit (22) by pressing and holding the
iron release button (18) (marked with a padlock
icon) - this enables you to rotate the tip of the
soleplate (6) (in a clockwise direction) out from
under the iron-to-base locking hook (16) and lift
the iron heel (8) away from the rear docking
hook (20).
WARNING: To avoid burning yourself if the
soleplate is still hot, never press down on the
iron-to-base locking button
(17)
to unlock the
iron.
During use, the iron may be rested on the iron
rest plate (19) with the soleplate tip on top of the
iron-to-base locking hook (16) and the heel
slotted on to the rear docking hook.
4
18
RN332000MUK Rev1.qxp_IB 11/09/2014 10:46 Page 7
Loading ...
Loading ...
Loading ...