Loading ...
Loading ...
Loading ...
7
Insignia 24 and 34 Bottle Wine/Beverage Cooler
www.insigniaproducts.com
Setting up your wine/beverage cooler
Before using your wine/beverage cooler
• Remove the exterior and interior packing.
• Let the wine/beverage cooler stand upright for approximately one half
hour before connecting it to power. This reduces the possibility of a
malfunction in the cooling system from improper handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This wine/beverage cooler is designed to be free standing only, and
should not be recessed or built-in.
• Place your wine/beverage cooler on a floor, countertop, or cabinet
that is strong enough to support the wine/beverage cooler when it is
fully loaded.
• Allow five inches of space between the back and sides of the
wine/beverage cooler and any surrounding walls. This allows the
proper air ventilation. Adjust the feet to keep the wine/beverage
cooler level.
• Locate the wine/beverage cooler away from direct sunlight and
sources of heat (stove, heater, radiator, and so on). Direct sunlight may
affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 50°F (10°C) or above 85°F
(29.4°C) will hinder the performance of this wine/beverage cooler. This
wine/beverage cooler is not designed for use in a garage or any other
outside installation.
• Avoid locating the wine/beverage cooler in moist areas.
Leveling your wine/beverage cooler
• It is very important for the wine/beverage cooler to be level in order to
function properly. If the wine/beverage cooler is not leveled during
installation, the door may not close or seal properly, causing cooling,
frost, or moisture problems.
• To level your wine/beverage cooler, you may either turn the leveling
foot clockwise to raise that side to the wine/beverage cooler or turn it
counter-clockwise to lower that side.
Providing proper ventilation
Place the wine/beverage cooler at least five inches from the wall to ensure
proper airflow to the compressor. Do not place the wine/beverage cooler
near any heat sources, such as a heater or stove, as this may put a strain on
the compressor.
NS-WC24BK6_NS-WC34BK6_15-0570_MAN_V1_ENG.fm Page 7 Wednesday, August 5, 2015 8:29 AM
Loading ...
Loading ...
Loading ...