Loading ...
PHONE: 763-331-3066 EMAL: info@hydro-smart .com WEB: www.hydro-smart.com
-2-
WARNING!!
Do not plug in control cord until all uids are introduced and
thermostat connection(s) are nished.
DAMAGES - If unit is damaged, do not return to store. Please call 763-331-3066 for trouble shooting, returns, or
replacement parts.
Step 1- Mount Integrator Panel onto wall with four 1/4” x 1 - 1/2” Lg wood screws. Utilize the slots
on the top and bottom of integrator panel and zone panel (When zoning by Pumps/Valves)
Step 2- Install Supply and Return lines to and from panel to boiler. Use Type L Copper or Oxygen Barrier PEX tubing.
Step 3- Install Supply and Return lines to and from panel to emitters (Manifold(s)). Connect integrator panel to zone
panel (When zoning by Pumps/Valves) Use Type L Copper or Oxygen Barrier PEX tubing.
Step 4- Introduce uids into system and purge air out of system.
Step 5- Install low voltage thermostat (TH135 or TH115-AF-024T)
Step 6- Plug in cord and activate thermostat. Acknowledge the following:
A. Both circulator pumps running.
B. Boiler energized and providing heat.
C. Observe gauges for performance of system (Pressure & Temperature).
Loading ...
Loading ...
Loading ...