Loading ...
Loading ...
Loading ...
DRAIN INSERT
90-2607
DRAIN AND DRAIN INSERT INSPECTION
The drain and drain insert should be checked annually to ensure there are no blockages or air lock in the drain system.
IMPORTANT
The drain insert is a critical feature of the dehumidifier drain management system. This component is required for the
dehumidifier to run properly. If the drain insert is not installed, you will not be able to reinstall the air filter. The air filter is
equipped with a safety mechanism that prevents you from fully inserting the filter without the drain insert installed.
WARNING
Running the dehumidifier without the drain insert can lead to condensate leaks.
REMOVING THE DRAIN INSERT
1. Turn the ON/OFF switch OFF.
2. Remove the filter access door from the drain side of the dehumidifier.
3. Remove the filter from the dehumidifier to access the drain insert.
4. Locate the drain insert which is located over the drain opening.
5. Remove the drain insert by hooking your finger into the finger loop
and gently lifting the cover up and out of the drain pan.
6. Clean the drain insert with warm water and mild detergent solution.
REINSTALLING THE DRAIN INSERT
1. Reinstall the drain insert by inserting your forefinger into the finger
loop and grasping the outer edge of the finger loop with your thumb.
2. Gently insert the drain insert tip into the drain opening and tilt the
cover downwards into place.
3. Insure the drain insert is seated properly by checking the top surface
of the drain cover is the same surface height as the filter guide
channel.
4. Turn the ON/OFF switch ON.
5. At the UI control, select the ON/OFF button and switch to ON mode.
CAUTION
Do not use spray solvents or cleaners on or near the inlet side of the dehumidifier.
If desired, apply cleaner to a cloth and use to clean the cabinet.
6
Loading ...
Loading ...