Loading ...
Loading ...
Loading ...
Page 12
Keep your tools clean for better and safer
performance. Follow the instructions for
changing accessories. Inspect tool cords
periodically and if damaged, have them
repaired by an authorized service facility.
Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never
use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep
all working controls free of dust. If the supply
cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
1. If your power tool does not start, check the
plug on the power supply rst.
2. If your power tool runs in low efciency,
check the tool speed and type of accessory.
3. If the problems are not solved, return the
tool to an authorized dealer for repair.
CAUTION
These accessories or attachments are recommended for use with your Multi tool specied in
this manual. The use of any other accessories or attachments might present a risk of injury to
persons. Only use an accessory or attachment for its stated purpose.
1pc Sanding pad
1pc Ridgid scraper blade
1pc 3-1/8” HSS circle saw blade
1pc 1-3/8” Universal end cut blade
1pc 1-1/8 Standard wood blade
1pc 1-3/4 Precision end cut blade
48pc Sanding sheet (40#-12pcs, 80#-12pcs, 120#-12pcs, 220# -12pcs)
1pc Bag
If your power tool becomes too hot, especially
when used at low speed, set the speed
to maximum and run it with no-load for 2-3
minutes to cool the motor. Avoid prolonged
usage at very low speeds. Always keep the
blade sharp.
Always ensure the workpiece is rmly held or
clamped to prevent movement.
Any movement of the material may affect the
quality of the cutting or sanding nish.
Start your tool before working and turn it off
only after you stop working.
Do not start sanding without having the
sandpaper tted.
Do not allow the sandpaper to wear away; it
will damage the sanding pad. The
guarantee does not cover sanding pad wear
and tear.
Use coarse grit paper to sand rough surfaces,
medium grit for smooth surfaces and ne
grit for nishing surfaces. If necessary, rst
make a test run on scrap material.
Excessive force will reduce the working ef-
ciency and cause motor overload. Replacing
the accessory regularly will maintain optimum
working efciency.
WORKING HINTS FOR YOUR MUTLI-TOOL
Loading ...
Loading ...
Loading ...