Loading ...
Loading ...
Loading ...
14
Set-Up and Use
- Press ‘Menu’.
- Turn the dial to scroll through the menu options:
7.8 BOOST Function (for occasional use)
The ‘BOOST’ function temporarily uses both the
immersion heater and the heat pump to increase the
temperature during a heating cycle. The “electrical
BOOST
YES
Enter
The ‘BOOST’ function is automatically deactivated as
soon as the set temperature is reached (end if heating
cycle).
- ‘BOOST’ can be cancelled by selecting ‘no’ in the
menu
7.9 Electric Mode
(to operate with electrical backup)
Electric mode uses only the immersion heater to heat
the water in the heat pump water heater. It provides a
back-up option if for any reason the heat pump is not
running (ducting not yet connected, dusty renovation
work being carried out near the appliance....). This can
ELEC MODE
YES
Enter
- Press ‘Menu’ to return to the main screen
7.7 Holiday Mode
‘Holiday’ mode puts the appliance on standby whilst the
freeze protection mode remains active. This function
can be programmed to run between 1 and 99 days and
HOLIDAYS
HOLI. RETURN. 8
Set number of days
in standby mode
Enter
time when the number of days set has ended.
Throughout the holiday period, the heat pump water
heater shows ‘Holi. Return.’ on the display screen, as
well as a countdown of the days.
-To cancel holiday mode select 0 days
- Press ‘Menu’ to return to the main screen.
- Press ‘Menu’.
- Turn the dial to scroll through the menu options:
- Press ‘Menu’.
- Turn the dial to scroll through the menu options:
- Press ‘Menu’ to return to the main screen.
7.6 Setting the Water Temperature
The water temperature can be adjusted between 30°C
and 65°C. The heat pump alone heats the water up
until 60°C. Beyond this temperature, up to 65°C, the
electrical backup immersion takes over.
- Press ‘Menu’.
- Turn the dial to scroll through the menu options:
TEMP SETT.
TARGET +
60°C
Set Temperature
Enter
- Press ‘Menu’ to return to the main screen
- In order to get the best from your heat pump, we
recommend that you do not leave the set water
temperature too high unless necessary. The default
temperature is set at 60°C.
Loading ...
Loading ...
Loading ...