Loading ...
Loading ...
Loading ...
9
English
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on top of heater for lifting and carrying.
2. Position heater so airow is not obstructed.
3. Plug power cord into standard grounded wall outlet.
4. Press the power button
and select Mode . Room temperature will illuminate on both heat settings and fan only mode. Next, set
thermostat to desired temperature using the + and - buttons.
5. Set timer to automatically power the unit off by pressing
. The number of hours will display above the icon. Using the (+) or (-) buttons, select
the amount of time in one-hour intervals, up to 12 hours. To cancel the timer operation, select 0 hours.
6. To enter Nighttime mode, press (
). All lights will turn off with the exception of the power button. The rst touch of the controls will wake up
the unit and dim to off again until you exit the nighttime mode. To exit nighttime mode, press (
) again.
7. Lock the controls by pressing and holding (
) for 3 seconds. None of the control buttons will function or be illuminated until the controls are
unlocked by pressing and holding (
) again for 3 seconds. If any of the controls are pressed while the unit is in lock mode, the lock icon will
ash indicating the need to unlock the controls before continuing use.
8. When turning the unit off by pressing (
), a 20 second timer will display and the unit will run in fan only mode to remove excess heat from the
unit before shutting off.
Loading ...
Loading ...
Loading ...