Loading ...
Loading ...
Loading ...
13
2. Using 2 people, slide the microwave oven out of the cabinet.
Unplug the microwave oven and place on a stable surface with
the microwave door and frame sitting slightly beyond the edge
of the surface.
3. Remove the 3 short screws to release the leftside cooling duct,
see below pictorial. Set screws and cooling duct aside.
A. Cabinet
B. Microwave Oven
A
B
A. Leftside Cooling Duct
B. Short Screws (3)
C. Screw holes (3)
MICROWAVE OVEN CARE
4. Remove the 4 screws which fasten the trim kit frame to the
microwave oven, and set the 4 screws aside.
5. Pull the Trim Kit Frame away from the front of the microwave
to release it. Note the ‘TOP’ and ‘up arrow’ molded into the
frame, the 4 locating pins and the locating slots, set frame
aside.
6. Remove the light cover screw from the top front of the
microwave oven.
7. Remove the light cover.
8. Disengage hook to remove LED board.
9. Unplug the LED terminal.
10. Connect replacement LED to terminal and snap it into place,
securing with the hook.
11. Plug in the LED terminal removed in step 9.
12. Reattach the LED board removed in step 8.
13. Reattach the Light cover removed in step 7.
14. Reattach the light cover screw removed in step 6.
15. Reattach the trim kit frame that was removed in step 5, to the
microwave oven by rst aligning the 4 locating slots with the
locating pins.
16. Use the 4 screws removed in step 4, to fasten the trim kit
frame to the microwave oven.
17. Use the 3 screws removed in step 3 to reattach the leftside
cooling duct.
18. Slide the microwave oven back to the cabinet. Plug in the
microwave oven.
19. Reattach the trim kit frame and microwave to the cabinet
using the screws removed in step 1.
A
B
C
A. Trim Kit Frame
B. #7-18x7/16" round head sheet metal screw (4)
C. Screw holes (4)
A
B
C
A. Trim Kit Frame
B. Locating pin (4)
C. Locating slot (4)
Screw
Light cover
Top front of the
microwave oven
Hooks
Terminal
Hook
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Loading ...
Loading ...
Loading ...