Loading ...
Daily Cleaning:
1. Pull off Stubble comb/Head guard,
if using, and rinse attachment.
2. Grasp the front
and back of the
cutter assembly
and pull away
from the shaver
body. (Diagram H)
3. Tap the stubble
from the foils and
cutters.
4. Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside
the hairpocket.
(Diagrams I – J)
5. Rinse head under running water.
6. Gently dry with towel or leave
disassembled to air dry.
7. Replace hair pocket assembly
when dry. (Diagram K)
8. Reattach the Stubble comb/Head
guard to protect the shaving head
until next use.
Monthly Cleaning:
1. Perform the daily
cleaning steps 1 – 4.
2. Place a drop of
liquid soap on
each cutter and
in the hairpocket.
(Diagram L)
3. Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the hair
pocket and into
any especially
dirty cutters.
(Diagram M)
4. Add a small
amount of water to
the cutters.
5. Replace the foil
assembly.
(Diagram N)
6. Turn on the shaver
for approximately
30 seconds.
7. While the shaver is running, rinse
the foils under running water.
(Diagram O)
8. Turn off shaver.
9. Remove foil assembly.
10. Rinse the cutters, hair pocket,
and foil assembly thoroughly.
(Diagram P)
11. Shake off excess water.
12. Replace foil assembly. (Diagram K)
13. Allow shaver to dry before
next use and attach the Stubble
Attachment to protect the head.
• Do not remove or replace head
assembly while shaver is running as
it may cause damage to the unit’s
foils and cutters.
• To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
• To dry, wipe the surface of the
shaver with a dry towel. Do not use
a hair dryer or heater to dry the
shaver.
• The shaver should not be used until
it has dried.
• Lubricate each cutter with
household oil.
• This product contains no user
serviceable parts.
The shaver is a
wet/dry appliance.
The shaver may
be cleaned under
warm water.
Trim
Cleaning and Care
NOTE: When cleaning your shaver,
make sure the shaver is turned off
and disconnected from the power
adapter.
For optimal shaver performance,
clean your shaver after each use.
CAUTION!
• Shaver can be held under running
water for cleaning.
1. Slide trimmer release button
up to engage the trimmer.
(Diagram E)
2. Trim long, difficult hairs and
side burns.
(Diagram F)
3. Close trimmer by sliding the
button down. (Diagram G)
When your rechargeable shaver reaches
the end of its useful life, the batteries
must be removed from the shaver and
recycled or disposed of properly in
accordance with your state and local
requirements. If this is not required by
law, you may elect to dispose of the
shaver with the batteries.
This device uses one of the following
types of rechargeable batteries: nickel
metal hydride (NiMH), nickel cadmium
(Ni-Cd) or Lithium Ion (Li-Ion) (see
included battery for indication of type).
CAUTION: ALL RECHARGEABLE
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCORDANCE
WITH APPLICABLE STATE AND LOCAL
REGULATIONS. DO NOT PUT IN FIRE
OR MUTILATE, AS THE BATTERY
MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT,
AS THIS MAY CAUSE BURNS.
Product Disposal
To Remove the Rechargeable Battery:
1. Remove phillips head screw at the
base of the shaver.
2. Pry the outer sleeve down off the
shaver handle.
3. Pry the back housing cover off the
shaver.
4. Remove screws from inner housing
and open inner housing to expose
the batteries.
5. Snip the battery wires and remove
batteries.
6. Dispose of battery properly.
At the end of this product’s life,
you can mail it to Spectrum Brands at
507 Stokely Drive, Deforest, WI 53532
marked “Product Takeback: Please
Recycle!"
Maintain your shaver’s peak perfor-
mance! Keep your shaver performing
like new!
• Because your satisfaction is
important to us, we want to make
it simple for you to keep your new
shaver performing at its peak.
• For the best possible shave, it is
necessary to replace the heads
and cutters on your shaver every
12 months.
• Remington makes this easy!
Two easy ways to order!
1. Call!
U.S. residents call
800-392-6544
2. Order Online at
RemingtonProducts.com
Warranty
Limited Five-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a five-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648 in
the U.S. or Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or
maintenance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO FIVE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other
applicable laws, or where the warranty would be prohibited under any
economic sanctions, export control laws, embargos, or other restrictive
trade measures enforced by the United States or other applicable jurisdic-
tions. This includes, without limitation, any warranty claims implicating
parties from, or otherwise located in, Cuba, Iran, North Korea, Syria and
the disputed Crimea region.
How to Order Shaver Accessories
Please refer to the shaver compari-
son and features chart near the
front of this manual that lists the
correct replacement part number
for your shaver.
It is very important to replace your
head and cutters when necessary to
ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 12 months. Here
are some signs of head and cutter
wear, indicating that replacement
is needed:
• Irritation: As the heads get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
• Pulling: When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your heads and cutters.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product from
an authorized source, you are not satisfied and would like a refund, return it with the
sales receipt indicating purchase price and date of purchase to the retailer from whom
it was purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
product within 30 days from the date of purchase. If you have any questions concern-
ing the money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, return it with the original dated sales receipt
directly to Remington and receive a full refund.** For questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged product.
7. Please allow 4–6 weeks to receive your refund by check.
100-240 VAC, 50/60 Hz
TYPE: F15A
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® / TM are owned by Spectrum Brands, Inc.
© 2020 Spectrum Brands, Inc. 7/20 27916
Made in China.
T22-7001706-A
Contains a listed adaptor.
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
E
F
G
K
H
I
J
O
M
N
P
L
PF7580_IB_27916-5yr.indd 2PF7580_IB_27916-5yr.indd 2 7/22/20 8:39 AM7/22/20 8:39 AM