Loading ...
Loading ...
Loading ...
Page 7
MAINTENANCE AND SAFETY
MAINTENANCE
Periodically clean the hutch front, trim, and
other surfaces with mild detergent and water.
Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SAFETY
WARNING:
Close and
lock the hutch before moving this
product.
WARNING:
DO NOT stand or lean
on this product.
WARNING:
DO NOT mount this
product on a truck bed or any other moving
object. This may cause personal injury or
product damage.
CAUTION:
Secure this product
properly before moving it with a forklift.
WARNING:
DO NOT alter this
product in any manner. For example, do not
weld external lockbars or attach electrical
equipment. This may cause product damage
or personal injury.
CAUTION:
Keep the product on
level surfaces. The product may become
unstable and tip if stored or moved on an
uneven surface, which may cause personal
injury or product damage.
WARNING:
To prevent the hutch
from easily tipping over, fasten the screws to
connect the hutch and cabinet.
POWER STRIP
MODEL: LTS-04C / CH-04C
SURGE PROTECTIVE DEVICES
RATING: 120V AC 15A 60Hz 1875W
USB: TOTAL 2.1 A
USB O/P: IT EQUIPMENT ONLY
VPR: 500-1000V (L-N) TYPE 3 SPD
CONFORMS TO UL STD. NO. 1363 AND
ANSI/UL STD. NO. 1449
CERTIFIED TO CSA STD. C22.2 NO. 308&8
Standard 2.1 A USB – Check your device
for compatibility.
WARNING:
RISK OF ELECTRIC
SHOCK. To reduce the risk of electric shock,
use indoors in a dry location only. Do not
plug into another power strip. Not for use for
a permanent installation.
WARNING:
Changes or
modifications to this unit not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
Loading ...
Loading ...
Loading ...