Loading ...
Loading ...
Loading ...
CONTINUOUS DRAINAGE
1. If you want to use this function, please pull out the water tank and plug a
9mm internal diameter water pipe onto the
“Water out tube” (See Fig.02). Replace the
water tank into the unit, the unit will now operate
while discharging the extracted water through
the free end of the fitted pipe, (note, please
ensure the free end is below the outlet
connection).
Please ensure drain away is lower than the unit outlet.
Filter Removal
•To remove the filter you must first remove the water tank as instructed above.
•The filter can then be removed from its slot by gripping the filter handle and
sliding it down and out of the back of the appliance as indicated below.
• Every 2 weeks, remove the filter and clean
it with warm water, below 40°C. Allow it to
dry naturally and then replace by
reversing the removal instruction above.
Care and Maintenance Instruction
1. To avoid the occurrence of vibration and noise the unit should not be
operated while located on any soft or uneven surface.
2. Never insert any foreign objects into the unit through its air inlet or outlet to
avoid hazard or unit failure.
Fig 02
Loading ...
Loading ...
Loading ...