Loading ...
Loading ...
Loading ...
6
Stainless steel CSS1 Refrigerator & FSS2 Freezer
Operating Instructions
TO OPERATE THE THERMOSTAT
Connect the unit to a power outlet. The unit will start automatically.
Select your desired temperature using the control knob:
0 = OFF
1 = Least cold setting
7 = Coldest setting.
DEFROSTING
The unit defrosts automatically at preset intervals. If however the doors are opened too often,
or if the unit if in a location with high humidity, or if the contents are changed more frequently,
it may be necessary to defrost the unit manually.
CLEANING
The condenser and the compressor compartment MUST be cleaned quarterly in order to
ensure appropriate temperature control and maintain energy efficiency. Use a vacuum cleaner
fitted with a soft brush attachment to remove dust carefully from the condenser, the
components and grilles.
The external and internal surfaces of the unit should be cleaned regularly. Switch the unit off
and disconnect the plug from the mains socket. Clean the external and internal surfaces of the
unit with a mild soap solution, then wipe dry. Do NOT use cleansers containing chlorine or
other harsh cleansing agents, as these can damage the stainless steel surfaces and components.
Use mild soapy water to clean the gasket and seals.
GETTING SERVICE ASSISTANCE
The cooling system is a hermetically sealed circuit and does not require any maintenance other
than regular cleaning (see ‘Cleaning’).
If the unit fails to work, first check the power supply. If you cannot locate the reason for the
failure, please contact your supplier, stating the model and serial number of the cabinet. You
may find this information on the rating plate, which is affixed on the back wall.
International CSS1_FSS2 manual 2017.indd 6 01/06/2017 12:45
Loading ...
Loading ...
Loading ...