Loading ...
Loading ...
Loading ...
5
1
. Before first use, unpack the appliance and place
all parts on a surface.
2. Wash the Jug
(3), Lid (2) and Measuring Cup (1)
in warm, soapy water and dry thoroughly.
CAUTION – Blades are sharp
3
. Place ingredients into the Jug (
3)
a
nd fit the
Lid
(2).
4. Ensure the 0 position is selected on the Speed
Dial
(6) before placing the Jug (3) onto the Motor
Base (5).
5. Place the Jug
(3) onto the Motor Base (5) by
aligning the tab and rotate clockwise to lock
1. Place ingredients into the Jug
(3). The amount of
mixture should not exceed the max level as
indicated on the Jug
(3).
2
. Push the Lid
(
2)
o
nto the Jug
(
3)
.
Be sure the
Measuring Cup
(1) is in place.
3. Plug into the wall power socket.
4. Turn the Speed Dial
(6) to the appropriate speed
for your task.
5. For a quick, powerful blend, turn the Speed Dial
(6) to the P position and hold for a few seconds
and then release. The Speed Dial (6) will reset to
the 0 position automatically. Repeat several times
until the consistency you want is achieved.
6. If you want to add ingredients while the blender is
working, remove the Measuring Cup
(1) (see
diagram below) and place through the Lid
(2)
opening.
7. When crushing and hard food, keep one hand
firmly on the Lid
(2).
8. When you have reached your desired consistency,
turn the Speed Dial
(6) to the 0 position.
NOTE: For each use, the consecutive
operation time should not exceed 1 minute.
At least 10 minutes rest time must be
maintained between two consecutive cycles
(2 x 1 minute) Let the unit cool to room
temperature before performing the next
operation cycle.
Before First Use
How to Use
1
2
1
2
FP403053_Glass REV 1.qxp_Layout 1 13/04/2018 09:45 Page 5
Loading ...
Loading ...
Loading ...