Loading ...
Loading ...
Loading ...
15
ASSEMBLY INSTRUCTIONS (CONTINUED)
14. Install the doors
I. Loosen the screws on the hinge arms and plates pre-attached on the outer walls (B and C).
II. Pick up left door (F) and attach it to left outer wall (B) by engaging both door hinges simultaneously. Please follow
the steps below to combine the door hinges together.
i. Extend both hinge arms on the left door (F) to open position.
ii. Insert the “J” hooks beneath the hinge arms into the lugs on mounting plates pre-attached on left outer wall (B).
iii. Press lightly on the end of both hinge arms to engage the catch.
iv. To remove the hinge arms from the mounting plates, press gently in the release lever on the back of hinge
arms.
III. Once assembled, go back and fully tighten all screws.
IV. Repeat the same procedure to attach the other right door (G) at the opposite side.
V. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a
good fit.
Release lever
I/F
(i)
“J” hook
(ii)
(iii)
I
II
III
B
C
F
G
15. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
2
2
2
2
1
1
b
a
1
a
3
c
1
c
3
2
2
Loading ...
Loading ...
Loading ...