Loading ...
Loading ...
Loading ...
49-9000035 Rev. 1 9
Using your Stand Mixer
7
Slide the bowl lid onto the
bowl. (Bowl lid is optional)
8
Plug the mixer into an
outlet.
9
Select desired speed by
rotating the control knob.
5
Insert your desired attachment onto the
output shaft. Press up until the attachment
FDQQRWJRXSDQ\IXUWKHU7KHQWXUQWKH
attachment counter-clockwise so the
attachment hooks over the pin on the shaft.
See the mixing chart on page 8 for a guide
on attachment use.
6
Release the lock lever by sliding to the right
and pushing the head of the mixer down
into the bowl until it clicks into place.
3
7LOWWKHPL[HUKHDGXSXQWLOLWORFNVLQWR
place.
4
Place the bowl in the bowl base and turn it
clockwise until it locks into place.
1
Make sure the mixer is unplugged and
turned off.
2
Release the lock lever by sliding it to the
right.
Appearance may vary slighlty
Loading ...
Loading ...
Loading ...