Loading ...
Loading ...
Loading ...
8
NS-DCR30A2/NS-DCR30A2-C Multi-Format Memory Card Reader
www.insigniaproducts.com
3 Select Format.
4 Type a name into the Volume Label box. The name of your memory card
appears next to the drive.
5 Click Start, then click OK in the Warning dialog box.
6 Click OK on the Format Complete window.
7 Click Close to finish.
Formatting a memory card with Macintosh
If your computer has trouble recognizing a new memory card, format the memory
card in your device or by using the computer.
To format a memory card:
1 Click Go, then click Utilities.
2 Double-click the Disc Utility from the list.
3 In the left-hand column, select the memory card you want to format, then
click the Erase tab.
4 Specify a volume format and name for the memory card, then click Erase. A
warning box opens.
5 Click Erase again. The Erase process takes a minute or so to erase and reformat
your memory card.
Troubleshooting
Caution
Formatting a memory card permanently deletes all files on the
card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
Symptom Solution
Memory cards do not appear in My Computer or
Computer (Windows operating systems) or on
the desktop (Mac operating systems).
• Make sure that the memory card is fully inserted into the slot.
• Make sure that the card reader is fully connected to your computer.
Unplug and reconnect your card reader.
• Try a different memory card of the same type in the same slot. If a
different memory card works, the original memory card should be
replaced.
• Disconnect the cable from your card reader and shine a flashlight
into the empty card slots. Look to see if any pin inside is bent, then
straighten bent pins with the tip of a mechanical pencil. Replace
your memory card reader if a pin has bent so much that it touches
another pin.
• Make sure that your computer has the lates OS updates and service
packs installed.
NS-DCR30A2-NS-DCR30A2-C_15-0446_MAN_V2_ENG.fm Page 8 Tuesday, June 2, 2015 9:22 AM
Loading ...
Loading ...
Loading ...