Loading ...
Loading ...
Loading ...
26
EN
Freestanding Installation
• Before using the appliance, the heater base (supplied separately in the carton),
must be tted to the appliance.
• Take the heater base out of the carton and four silver xing screws supplied in the
instruction manual bag.
• Remove the front glass panel of the heater.
• Place the metal body horizontally on a stable table.
• There are four installation holes at bottom of the heater as indicated (see Fig.7).
• The heater base has two plastic posts, make sure the posts insert the right holes at
bottom of the heater as indicated (see Fig. 8).
• Make sure the heater base is rmly attached to the heater, then x the heater base
rmly by the four silver xing screws supplied, as indicated (see Fig. 9).
Figure 7 Figure 8
Figure 9
Loading ...
Loading ...
Loading ...