Loading ...
Loading ...
Loading ...
11
TRAEGERGRILLS.COM
SEASONING YOUR GRILL
ALL NATURAL
HARDWOOD
TO BE USED ON INITIAL FIRING ONLY. In order to ensure proper operation of the grill, you must first prime the
auger by allowing the auger tube to be “charged” with pellets.
21
3
Make sure there are no foreign objects in the auger before
adding pellets to the hopper.
Turn grill on: Flip the Main Power switch on the back of
the grill to ON (I), press any button on the control panel
to activate the WiFIRE® Electronic Controller. Afer
a few seconds, the home screen will display.
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
WARNING! Use ONLY TRAEGER® BRAND
HARDWOOD PELLETS, which are specifically made to
work in our grills. Never use heating fuel pellets in
the grill.
NOTE: The seasoning reminder will display the first few
times you power up the grill. However, you only have to
season your grill upon initial start-up.
AUGER
>Prime Auger
>Clear Auger
>Back
4
Press MENU to display the main menu. Turn the dial to
select AUGER, then select Prime Auger.
The auger tube should take approximately 2 minutes
to fill with pellets and begin dispensing into the firepot.
Once pellets begin to fall into the firepot, select Back
to turn o the auger. You only need a few pellets in the
firepot to season your grill.
Loading ...
Loading ...
Loading ...