Loading ...
Loading ...
Loading ...
W415-2007 / D / 04.28.21
EN
18
finishing
A. Line up the casting holes with the right retaining bracket holes and secure in place using
the 1/4-20 hex-head screws. Repeat on the left side, using the left retaining bracket (Fig. 1, A).
B. Thread the 1/4-20 round-head screws approximately half their length into the keyed
bracket (Fig. 1, B).
C. Place the casting pieces face down on a protected surface and assemble as shown (Fig. 2).
D. Fasten the securing brackets using the screws (Fig. 2, C).
E. Secure the corner brackets into place on both sides of the casting using the
screws (Fig. 2, D).
F. Lift the casting, place the keyed holes onto the 1/4-20 round head screws, and rest the casting into
place (Fig. 2). Adjust screws as necessary to stabilize.
4.4 surround installation, contemporary cast
1/4-20 ROUND
HEAD SCREWS
RETAINING
BRACKET
A
B
KEYED BRACKET
(LEFT & RIGHT)
CORNER
BRACKET
SECURING
BRACKET
C
D
Fig. 1
Fig. 2
A
B
To ensure the joints are flush, adjustment may be necessary. To adjust the cast components, loosen the
screws and then align the casting to desired position.
note:
Loading ...
Loading ...
Loading ...