Loading ...
Loading ...
Loading ...
Page 6
RAISE AND RELEASE
DRAWER FRONTS
This unit is equipped with raise and release
drawer fronts.
To open, lift up on the drawer front while
pulling towards you.
To close, shut the drawer firmly until the latch
engages.
If the drawer does not stay closed, the drawer
contents may be the obstruction, or the hook
may be bent or it may rub against the drawer
slides. To fix this problem, lightly bend the
hook until the drawer engages in the slide.
TO REMOVE DRAWERS
Pull the drawer out so it is almost fully
extended. PUSH UP on the black release
lever on one side, while PULLING DOWN
on the black release lever on the other side.
While holding the levers in the positions as
instructed above, pull the drawer outward
until it is released from the drawer slide.
PUSH UP (ONE SIDE)
PULL DOWN (OTHER SIDE)
TO REPLACE DRAWERS
Extend the drawer slides from the tool chest
or cabinet. Insert the brackets on each side
of the drawer into the slots in the chest or
cabinet slides, being careful that they are
positioned properly. Once properly inserted,
completely close the drawer / work top to set
the slides in their proper positions.
ASSEMBLY AND OPERATION
Loading ...
Loading ...
Loading ...