Loading ...
Loading ...
Loading ...
10
TROUBLESHOOTING
Symptoms
Remedies
Compressor will not start
Check if the power cord has been plugged in.
Check for blown fuse.
Poor performance
Move the unit from direct sunlight, and avoid
installing heating devices near the unit.
Install the unit in a well-ventilated place with
a minimum of 6” clearance at the back.
Check the condenser, and clean if heavy
dust has collected.
Check to see if contents are blocking the air
duct.
Check the temperature controller for possible
incorrect temperature setting.
Check to see if refrigerant charge is low.
Make sure the door is completely closed.
No interior light
Turn off the light switch and turn it on again.
Make sure the LED lighting assembly is
correctly installed.
Replace the LED assembly if necessary.
Unit is noisy
Make sure unit is installed on a level surface.
Make sure to maintain the minimum
clearance of 6” from the wall.
Check for loose parts or mounting.
Make sure the tubing is free from any contact
to avoid rattling.
Condensation on cabinet
and/or floor
Reduce the relatively humidity in the area
where the unit is installed.
Gasket on door or head section is not sealing
properly. Repair or replace gasket as
necessary.
Loading ...