Loading ...
Loading ...
Loading ...
5
INTRODUCTION
IMPORTANT!
GENERAL
Read this entire manual. Failure to follow all the guides, instructions and rules could cause personal
injury or property damage. Improper installation, adjustment, alteration, service and use of this unit
can result in serious injury.
This unit must be installed by a licensed electrician and plumber. The installation must comply with
all national, state and local plumbing and electric codes. Proper installation is the responsibility of the
installer. Failure to comply with the installation and operating instructions or improper use voids the
warranty.
Save these instructions for future reference. Installer should leave these instructions with the consum-
er.
If you have any questions regarding the installation, use or operation of this micro boiler, or if you
need any additional installation manuals call Hydro Smart at 763-331-3066 or visit us online at www.
hydro-smart.com
• The output of heat from the boiler is electronically controlled. The boiler will deliver any water tem-
perature between 86° F - 140° F. Set the desired water delivery temperature using the knob on the
front cover. (Do not exceed temperatures above 130° when using this product with tubing in
concrete)
• When the power light is ashing, full element power is being applied. When the power light is not
ashing, the element power is being modulated to the water delivery temperature.
• Recommend setting for radiant oor heating (Tubing in Concrete) is 105° F - 125° F.
• Recommended setting for Staple Up (Floor Warming Only) is 130° - 140° F.
• Temperature setting and water delivery temperatures may vary depending on ow rates. Size boil-
er accordingly. See ow rate chart for more information.
Loading ...
Loading ...
Loading ...