Klarstein 10031982 User Manual

Loading ...

To activate the touch-sensitive display keys: During operation, the display

keys usually turn o. Touch the area beneath the temperature display in order to

activate the display keys.

ECO-mode (energy saving mode): Press and hold the "Settings" (16) and Down

arrow (14) for three seconds (or press the ECO button on the remote so the

appliance can be set to energy saving mode. In energy saving mode, the display

will only show certain features (depending on how you have set the device before

putting it into energy saving mode).

Sleep mode: If no buttons are pressed for 10 seconds when the appliance begins

to heat, the display will enter sleep mode and only display the surrounding

temperature.

Open window detector: If the surrounding temperature drops by 3°C within

a 2 minute period, the system will activate the open window detector. The

corresponding symbol will appear on the display and it will make a noise. The

heating will turn o.

Day/week timer: Press the „W/24H“ button to switch between the settings for

the day and week timer. The display will then show "DayTimer" and "week timer",

respectively.

Day timer: This setting will display as "DayTimer". Press "Weektimer" on the

remote to set the amount of hours. Choose one hour using the arrow buttons (13,

14). Using the "Settings" button (16) you can change the minutes. You can use the

arrow buttons to set the minutes. Conrm your setting with the OK button and

then save your settings.

Week timer: The week time permits 4 operating cycles in one day and seven days

in a week. "Weektimer" will appear on the display. Press the "Settings" button (16)

on the remote in order to view any day ((6) will blink). Using the arrow buttons (13,

14), select the rst operating cycle. Using the "Settings" button (16) you can then

choose a start time that you can select using the arrow buttons. Use the "Settings"

button (16) again to set a switch-o time. Proceed the same way to set.

To cancel a programme: To remove all previous settings (Daytimer or weektimer),

press and hold (16) for 10 seconds.

Background lighting: Press the OK button on the remote when heating. The

background will light up in dierent colours. Every time you press the button the

colours will change. There are 6 colours in total. Once you have made it through

to the last colour, you can press the OK button again to turn o the background

lighting.

To turn o: Press the on/o button to turn o the appliance. The appliance will

then cease to operate. The appliance will switch o.

Loading ...

Klarstein 10031982 Bornholm Single Convection heating