Loading ...
Loading ...
Loading ...
10
Emptying and storing
W
hen you have finished ironing, p
r
ess and hold
the power button
(3) to switch the product off,
t
hen
u
nplug and empty all water from your iron.
W
hen cool, store the iron on its heel
(
14)
w
ith the
power cord
(6)
wrapped loosely around the heel.
N
OTE: Please see point 4 of ‘Exclusions’ on page
12
.
Cleaning the soleplate
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate (18),
set the iron at the MAX setting and pass it over a
clean piece of cotton to draw the deposit off the
surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Removing limescale
Y
our iron has a built in self clean system
designed to keep the water valve, steam
chamber and steam vents clear of lint and
loose mineral deposits.
When the self clean indicator (23) appears on the
digital display (10), the self clean function must
be operated.
1 H
alf fill the iron with water.
2 C
onnect to a mains supply outlet.
3 Wait for the temperature to be reached - the
IntelliTemp setting indicator
(21)
with illuminate
c
onstantly.
4 P
ress and hold the power button (3) to switch
the product off
.
5 Disconnect the iron from the mains supply outlet.
6 W
hilst the iron is still very hot, hold the iron
horizontally over a sink.
CAUTION: The soleplate will still be hot, so
ensure the power cord and plug are kept away
from it and the sink.
7 Press and hold the self-clean button
(13)
.
WARNING: Steam and boiling hot water will
drain from the holes in the soleplate. Keep
hands and body away from the hot water. This
washes away the scale and minerals that have
built up inside the steam chamber.
8
Whilst still holding the self-clean button, gently
move the iron back and forth until the water tank
is empty.
9
When steam and hot water ceases to be
released from the soleplate, release the
self-clean button.
10
When the process is complete, re-connect to a
mains supply outlet and allow to heat up - this
will dry the soleplate.
11 Disconnect the iron from the mains supply outlet.
12
Rest your steam iron on its heel
(14)
and allow to
fully cool down.
13
Wipe the soleplate with a cold, damp cloth.
After this cleaning operation, empty out any
remaining water.
IMPORTANT: Do not attempt to descale the
soleplate with descaling products.
Maintaining your iron
23
RN305003 MUK Rev1.qxp_IB 13/03/2019 11:46 Page 10
Loading ...
Loading ...