Loading ...
Loading ...
Loading ...
14
6) Disconnect the suction tube by
compressing both plastic tabs to unlock
the joint in the direction of the black arrows
and pulling the tube clear to drain the tank.
7) Spread out the tabs on both sides to unlock
the water tank, and pull it out toward you.
Soak the water tank in the sanitizing
solution for 10 minutes.
8) Lift off the ice chute from the front frame
pipe and then from the rear frame pipe.
Soak the ice chute in the sanitizing
solution for 10 minutes.
9) Pull the discharge tube from the spray
assembly. Remove the assembly by
pulling it toward you.
10) Remove the two caps. Soak the caps and
the spray assembly in the sanitizing
solution for 10 minutes. If the nozzles are
clogged, clean them with a wire or a
suitable brush.
11) Refit the two caps in their correct
positions. Make sure the reducing pipe is
in place in the center.
Water Tank
Joint Drain
Suction Tube
Ice Chute
Frame Pipe
Discharge
Tube
Spray
Assembly
Cap
Reducing Pipe
Unlock Unlock
Loading ...
Loading ...
Loading ...