Loading ...
Loading ...
Loading ...
15
Automatic Overload Protection
Your machine is equipped with a special feature: Automatic Overload Protection. This built-in
feature is designed to protect the motor and prevent your machine from overheating. When
engaged, this Automatic Overload Protection will cause the motor to shut off and possibly emit a
light odor.
If your Automatic Overload Protection should ever be activated, refer to this manual to easily reset
your machine.
Retaining Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no longer securely
holds the blade assembly in place, DO NOT CONTINUE TO USE THE CONTAINER.
Error Codes (ERR1, ERR2)
1. ERR1
When the display panel reads “ERR1” this indicates that there’s an issue with the motor or the
motor sensor. If the motor sensor does not detect any motor rotation or if the rotation speed is
abnormally low, the machine will stop running and display “ERR1” and make a beeping sound
(alarm). Please contact Tribest Customer Service to resolve this issue. The following parts may need
to be checked:
1. Motor Assembly connection and/or Motor Assembly
2. Power PCB Assembly
2. ERR2
When the display panel reads “ERR2” this indicates that the blending container is not installed prop-
erly on top of the motor base. If the blending container is removed mid-operation, the machine will
stop running and display “ERR2” and make a beeping sound (alarm). Please check to see that the
blending container is properly seated before operation and removed ONLY after the blender is no
longer in operation. The following parts may need to be checked:
1. Proper reinstallation of blending container
2. Safety Switch Assembly
3. Main PCB Assembly
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...