Loading ...
Loading ...
Loading ...
Morton
®
Water Softener Installation & Operation Manual 5
*Capacity to reduce clear water iron is substantiated by laboratory test data. State of Wisconsin
requires additional treatment if water supply contains clear water iron exceeding 5 ppm.
**Typical residential chlorine concentration is 0.5 to 1.0 ppm.
§ From independent laboratory test data.
This system conforms to NSF/ANSI Standards 42 & 44 for the specific performance claims as
verified and substantiated by test data.
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration time
based on the amount needed.
SPECIFICATIONS
Model MHY
M
odel Code oHy
Rated Softening Capacity (Grains @ Salt Dose)
1
2,300 @ 2.8 lbs.
23,800 @ 9.2 lbs.
27,200 @ 15.0 lbs.
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 4,365 @ 2.8 lbs.
Water Used During Regeneration @ Minimum Salt Dose 5 gallons / 1,000 grains
Total Water Used Per Regeneration @ Maximum Salt Dose 50.3 gallons
Rated Service Flow Rate 6.5 gpm
Amount of High Capacity Ion Exchange Resin 0.94 cu. ft.
Pressure Drop at Rated Service Flow 9.6 psig
Water Supply Max. Hardness 95 gpg
Water Supply Max. Clear Water Iron 3 ppm*
Water Pressure Limits (min. / max.) 20 - 100 psi
Water Temperature Limits (min. / max.) 40 - 100 °F
Minimum Water Supply Flow Rate 3 gpm
Maximum Drain Flow Rate 2 gpm
0.50 ppm
0.75 ppm
Rated Capacity at Chlorine Concentration** of: 1.0 ppm
1.5 ppm
2.0 ppm
2,280,000 gal.§
1,520,000 gal.§
1,140,000 gal.§
760,000 gal.§
570,000 gal.§
Specifications & Performance Claims
In the state of California: You must turn the Salt Efficiency Feature setting to ON. This may initiate
more frequent recharges. However, it will operate at 4,000 grains per pound of salt or higher. To turn
on the Salt Efficiency Feature, follow the instructions in the “Salt Efficiency” section of this manual.
PERFORMANCE CLAIMS
Contaminant Influent Challenge Level
Maxiumum Allowable
Product Water Level
Barium 10 ±10% mg/L 2.0 mg/L
Radium 226/228 25 pCi/L 5 pCi/L
Substance Influent Challenge Level Reduction Requirement
Chlorine 2.0 ±10% mg/L 50%
Loading ...
Loading ...
Loading ...