Loading ...
Loading ...
Loading ...
WWW.WEBER.COM
®
43
MAINTENANCE
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in
the OFF position.
Check Igniter Wires on the Underside of the Side Burner
Tools required: Phillips screwdriver.
A) To remove side burner cabinet back panel and side burner cabinet water deflector:
a) Facing the back of the unit, remove screws that secure back panel of side
burner cabinet with a Phillips screwdriver (1).
b) Remove back panel and set aside.
c) Facing the front of the unit, open side burner cabinet door and remove screw
and washer securing side burner cabinet water deflector (2).
d) Facing the back of the unit, push water deflector forward to allow rear edge
to drop down. Pivot water deflector down on an angle and remove from side
burner cabinet (3).
B) Locate the igniter wires at the underside of the side burner (4).
C) Make sure black wire (5) is connected to the black terminal clip on the ignition
module.
D) Make sure white wire (6) is connected to the white terminal clip on the ignition
module.
Note: Spark should be a white/blue color, not yellow.
6
5
4
1
3
2
2
Loading ...