Loading ...
Loading ...
Loading ...
6
Insignia 16-Bottle Wine/Beverage Cooler
www.insigniaproducts.com
Components
Setting up your wine/beverage cooler
Before using your wine/beverage cooler
• Remove the exterior and interior packing.
• Let the wine/beverage cooler stand upright for approximately two
hours before connecting it to power. This reduces the possibility of a
malfunction in the cooling system from improper handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This wine/beverage cooler is designed to be free standing only, and
should not be recessed or built-in.
• Place your wine/beverage cooler on a floor, countertop, or cabinet
that is strong enough to support the wine/beverage cooler when it is
fully loaded.
• Allow five inches of space between the back and sides of the
wine/beverage cooler and any surrounding walls. This allows the
proper air ventilation. Adjust the feet to keep the wine/beverage
cooler level.
• Locate the wine/beverage cooler away from direct sunlight and
sources of heat (stove, heater, radiator, and so on). Direct sunlight may
affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 50°F (10°C) or above 85°F
(29.4°C) will hinder the performance of this wine/beverage cooler. This
wine/beverage cooler is not designed for use in a garage or any other
outside installation.
• Avoid locating the wine/beverage cooler in moist areas.
Leveling feet
Wine shelves
Wine basket
Hollow glass door
NS-WC16BK6_NS-WC16BK6-C_15-0571_MAN_V1_ENG.fm Page 6 Friday, July 10, 2015 8:01 AM
Loading ...
Loading ...
Loading ...