User Manual Remington HC3160 Ultimate Precision Haircut Kit

Documents for Remington HC3160

The following documents are available:
User Manual Photos
HC3160 photo
Worldwide Voltage
This clipper works with 100V to 240V power source.
Line Cord Safety Tips
1. To insert plug, grasp it firmly and guide it into outlet.
2. To disconnect the appliance, grasp the plug and remove it from outlet. Do not pull or
yank on the cord or appliance. Do not wrap the cord around the appliance.
To Attach And Remove the Trimming Attachments
Note: Always ensure the trimmer is switched off
before changing any attachments
The trimmer comes with the Precision T-Blade
attached.
To remove the T-Blade attachment, pull
upwards.
To attach the Foil Shaver push the head down
until you hear a click.
The Precision T-Blade can be used facing
forward or away from you for enhanced
visibility and control (A).
To Attach Guide Combs
1. Select the trimming guide that matches the length you want the hair to be after
the cut. The trimming guides are numbered and marked with specific lengths.
(See preceding product features to determine which combs are included.)
2. While the clipper is off and the T-Blade attachment on the clipper, hold the
guide comb with the teeth up. Hook the front edge of the comb to the teeth
of the clipper blade. Then push the back of the comb down until it snaps in
place.
To Remove Guide Combs
Pull small tab on rear of comb up and away from clipper.
T-Series
Ultimate Precision Haircut Kit
Use and Styling Guide
HC3160
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
Do not use while bathing or in
the shower.
Do not place or drop into water
or other liquid.
Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
Always unplug this appliance from
the electrical outlet immediately
after using.
Unplug this appliance before
cleaning it.
Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
Do not plug or unplug this appliance
when your hands are wet.
Do not use an extension cord
or a voltage converter with this
appliance.
Do not place this appliance on any
surface while operating.
Do not use this appliance with a
damaged or broken cutting unit,
as injury may occur. Always make
certain blades are aligned properly.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
This appliance is for household
use only.
An appliance should never be left
unattended when it’s plugged in.
Close supervision is necessary
when this appliance is used
on or near children or persons
with special needs.
This appliance is not to be used
by a child.
Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
Keep the cord away from heated
surfaces.
Never operate this appliance if it
has a damaged cord or plug, if it
is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
Never drop or insert any object into
any of the appliance’s openings.
SAVE THESE INSTRUCTIONS
Product Features
Thank you for choosing Remington. Your clipper is designed to perform dependably
and efficiently for years to help you to maintain a range of hair styles.
2
4
1
1. Clipper
2. Foil Shaver
3. Storage Pouch
4. 12 Guide Combs
How to Use the Clipper
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
A
Comb Guide Length
#0
1.5mm (1/16")
2.0mm
2.5mm
#1 3.0mm (1/8")
4.5mm
#2 6.0mm (1/4")
#3
9.0mm (3/8")
#4
12mm (1/2")
#5
15mm (5/8")
#6
18mm (3/4")
#7
22mm (7/8")
#8
25mm (1")
3
HC3160_IB_27924.indd 1HC3160_IB_27924.indd 1 8/11/20 12:28 PM8/11/20 12:28 PM
Loading ...