Loading ...
Loading ...
Loading ...
11
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
* Connect to a turntable (MM) that has a phono preamp built-in. If your
turntable (MM) does not have a built-in preamp, you will need a
commercially available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you will need a
commercially available MC head amp or MC transformer as well as a
phono preamp. See your turntable’s manual for details.
Connecting recording components
Connecting the power
To connect your receiver to power:
• Plug the power cord into an AC outlet.
Using rubber feet/pads for more stable
speakers
We recommend using the rubber feet (provided) to
achieve the best possible sound from your
speakers. The rubber feet prevent the speakers
from moving, providing a more stable platform.
Wall mounting your speakers
The speakers can easily be wall mounted by using
the keyhole slots.
To mount the front or surround speakers vertically,
use the keyhole slot shown to hang each speaker
on a screw that is securely screwed into the wall.
COAXIAL
IN 1 (BD/DVD)
Blu-ray disc/DVD
player
X
3 COMPONENT
VIDEO
IN 1 (BD/DVD) Component
video
Blu-ray disc/DVD
player
X
IN 2 (CBL/SAT) Satellite, cable,
set-top box
X
OUT TV or projector
4 MONITOR OUT Composite
video
TV or projector
BD/DVD IN Analog audio
and composite
video
Blu-ray disc/DVD
player
VCR/DVR IN VCR or DVD
recorder/Digital
Video recorder
CBL/SAT IN Satellite, cable,
set-top box
GAME IN Game console
TV/CD IN Analog audio TV, CD player,
turntable*, cassette
tape player, MD,
CD-R
Notes
• The receiver can output audio and video signals
from the AUX INPUT jacks to the VCR/DVR OUT
jacks.
• With connection 2, you can enjoy Dolby Digital
and DTS.
• With connection 4, if your Blu-ray Disc/DVD
player has both main stereo and multichannel
outputs, be sure to connect the main stereo.
• With the connections described above, you
cannot record the video through the receiver. To
make a connection for video recording, see the
following section.
No. Jack Signal Components Assign.
VIDEO
IN
AUDIO
IN
LR
VCR DVD d
VCR or DVR Recorder, or
Cassette, CDR, or MD
To record audio and video from the same
source input
Notes
• The AV receiver must be turned on for
recording. Recording is not possible while it’s in
Standby mode.
• If you want to record directly from your TV or
playback VCR to the recording VCR without
going through the AV receiver, connect the
TV/VCR’s audio and video outputs directly to
the recording VCR’s audio and video inputs. See
the manuals supplied with your TV and VCR for
details.
• Video signals connected to composite video
inputs can be recorded only via composite
video outputs. If your TV/VCR is connected to a
composite video input, the recording VCR must
be connected to a composite video output.
• The surround sound and DSP listening modes
cannot be recorded.
• Copy-protected Blu-ray discs and DVDs cannot
be recorded.
• Sources connected to a digital input cannot be
recorded. Only analog inputs can be recorded.
• DTS signals will be recorded as noise, so don’t
attempt analog recording of DTS CDs or LDs.
Keyhole slot for wall
mounting
Keyhole slot for wall
mounting
Front speakers
Surround speakers
8-11/16” (240 mm)
Center speaker
Keyhole slot for wall mounting
NS-HT511_11-0310_MAN_.book Page 11 Wednesday, April 13, 2011 11:12 PM
Loading ...
Loading ...
Loading ...