Loading ...
Loading ...
Loading ...
5
Using the Steam Generator
Plug the appliance into a mains outlet and press
the power button
(15). The power indicator light
(14) will illuminate and the steam ready indicator
light (16) will flash.
Remove the detachable water tank (2) by
squeezing the water tank release handle
(1), and
fill with water through the filling aperture (3) to the
max fill line
. Replace the water tank.
IN HARD WATER AREAS, WE RECOMMEND
THE USE OF DISTILLED, DEIONISED OR
DEMINERALISED WATER.
Never use battery topping up fluid or water
containing any substances like starch, sugar,
fragrant additives or defrosted water from a
refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 8.
Re-filling during use
If the water level is too low, the unit will not
produce steam. If this happens, refill the
detachable water tank (2) with water.
L
ocate the steam generator horizontally on the iron
rest plate of your ironing board (if large enough) or
o
n a heat resistant stand at the same height as
your ironing board or below it. Always ensure the
s
team generator is on a firm surface when ironing.
WARNING: Do not use the product on a surface
w
hich could be damaged by heat or steam such
as a worktop or a polished wood surface.
I
f in doubt, contact Morphy Richards.
R
emove any protective cover from the soleplate
(7) and the base unit (12).
Unwind and straighten the power cord and steam
supply cord.
We recommend for first time ironing that you
iron over an old towel.
Lo
c
a
t
i
o
n
Be
f
o
re
use
1) Filling the water tank 2) Switching on
RN333100 MUK Rev2.qxp_IB 18/12/2018 12:31 Page 5
Loading ...
Loading ...
Loading ...