Loading ...
Loading ...
[_ON BLOWER
V
L,GHT
ON
sPEEol
Speed
Infinite speed slide control controls blower speed.
Slower
Turns the blower "ON" and "OFF".
When the blower is turned "OFF", the speed control remains
at the preset speed. When the b!ower is turned on again, it will
return to the previously chosen setting.
Light
Turns the light "ON" and "OFF".
First position turns on both bulbs for normal lighting.
Second position turns off the left side bulb. Ifyou want a night-
light feature, combine a 75 Watt bulb (on the left) and a 25
Watt bulb (on the right).
Third position turns both bulbs "OFF".
Maximum bulb rating is 75 Watts. Do not install bulbs rated
higher than 75 Watts.
WARNING: To reduce the risk of electric shock,
disconnect from power supply before cleaning.
Aluminum mesh filters
Clean frequently using hot water and a mild detergent or in
your dishwasher. The aluminum mesh filters should be washed
approximately every month depending on the amount of us-
age. Wash more often if your cooking style generates greater
grease - like frying foods or wok cooking.
Non=ducted filters (Clean Cooking hoods only)
(available separately - see page 4)
Clean filter surfaces frequently with a damp cloth and a mild
detergent. DO NOT immerse filters in water or put in dish-
washer. With normal hood use, replace the non-ducted filters
approximately every 6 months. Replace filters more often as
hood use increases.
Painted hood surfaces
Wiping regularly with mild soap/detergent and warm water
should protect painted hood surfaces. Be cautious about us-
ing "New and Improved" cleaning agents. Your hood is in-
stalled over hot cooking equipment. Most chemicals found in
cleaning agents react with heat to loosen paint.
Stainmess steemhood surfaces
Stainless steel hoods should be washed regularly with a clean
cloth, warm water and mild soap or dish detergent. Clean in
the direction of the polish lines. Rinse well with clear water
and wipe dry immediately. You may wish to apply light oil used
for furniture polishing to emphasize its bright finish.
Smower assembmy
Blower assembly can be cleaned with a damp cloth and mild
detergent. Use care when cleaning blower wheels - they must
not become bent or misaligned. DO NOTALLOW WATER TO
ENTER MOTOR= Make sure all surfaces are completely dry
before re-installing filters and restoring power=
Motor is permanently lubricated. Do not oil or disassemble
motor.
:S
:S
O_
q_
q)
2
g-
3
Loading ...
Loading ...
Loading ...