Beko DUT36520W White Front Control, Pocket Handle Dishwasher

User Manual - Page 23

For DUT36520W. Also, The document are for others Beko models: DUT36520X

PDF File Manual, 48 pages, Read Online | Download pdf file

DUT36520W photo
Loading ...
Loading ...
Loading ...
20
USA
6.1 KEYS
On / Off key
This key is used to turn the machine all on
off.
C
When turned “ON”, the machine
will default to Economy
Program.
A signal is heard and the machine door
is turned on. Press the On / Off key for 1
second to turn off. A signal will be heard
and machine will turn off at the end of 1
second. To turn off while the programme
is running, keep Off key pressed for 3
seconds. A countdown in the form of “3”,
“2”, “1” will appear on the display. Machine
will turn off with the end melody at the end
of 3 seconds.
Start / Pause / Cancel key
It is used to start, pause or cancel a
selected programme or function.
Program Selecton keys
They are used to select various programs
selected from the Program Table on the
following page..
Delayed Start key
Use this to the delay the program for a later
time
6.2 PREPARING THE
MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
wah arms spin freely.
4. Put recommended amount of
detergent into the detergent
dispenser.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
6.3 PROGRAMME
SELECTION
1. Press the On/Off button to turn on
your machine.
2. Chose the desired program (See
program table on next Page)
3. Press Programme Selection keys until
the number of the programme you
selected appears on the Programme
indicator. Use P+ to switch to the next
programme, and P- to switch to the
previous one.
C
The Energy Guide label and all
offical certifications are based
on ‘Normal’ soil-sensing cycle
as follows: If available on the
unit, the automatic detergent
detection feature should be
deactivated. Dishes should
be loaded with the upper
rack on its 2nd position and if
available third basket should
be removed. Tests should
be done without any rinse
aid in the rinse aid dispenser.
Depending on the amount of
water taken in preconditioning
cycle, calculated amount
of detergent according to
the definitions in the test
procedure should be inserted
into the detergent dispenser,
without detergent in prewash.
For optimal performance with
minimum energy consumption,
it is recommended to disable all
other auxilary options.
Loading ...
Loading ...
Loading ...