Loading ...
Loading ...
Loading ...
8
This product is for household use only.
Description
1 Foil & Cutter cassette
2 Long hair trimmer*
3 Precision mode switch*
4 On/off switch
5 Green charging light(s)
6 Red low-charge light
7 Replacement light for shaving parts
8 Shaver power socket
9 Special cord set (design can differ)
10 Charging stand*
11 Travel pouch*
12 Protection cap*
13 Beard trimmer head with 5 combs (BT32)*
* not with all models
Charging
Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high temperatures.
Recommended ambient temperature for shaving is 60 °F to 95 °F / 15 °C to 35 °C.
Do not expose the shaver to temperatures higher than 122 °F / 50 °C for extended
periods of time.
Using the special cord set (9), connect the shaver or the charging stand (10) to an
electrical outlet with the motor switched off.
When charging for the first time or when the shaver is not used for a few months,
leave the shaver to charge continuously for 4 hours.
Once the shaver is completely charged, discharge the shaver through normal use.
Then recharge to full capacity. Subsequent charges will take about 1 hour.
5-minute quick charge is sufficient for a shave.
A full charge provides up to 45 minutes of cordless shaving time depending on your
beard growth. However, the maximum battery capacity will only be reached after
several charging/discharging cycles.
Charging lights (5)
The green charging light shows the charge status of the batteries. The green charging
light blinks when the shaver is being charged or switched on. When the battery is fully
charged, the green charging light shines permanently, provided the shaver is
connected to an electrical outlet.
Low-charge light (6)
The red low-charge light flashes when the battery is running low.
You should be able to finish your shave.
90988231_3080s-3010BT_NA_S6-32.indd 890988231_3080s-3010BT_NA_S6-32.indd 8 20.07.16 08:4620.07.16 08:46
Loading ...
Loading ...
Loading ...