Loading ...
Loading ...
Loading ...
To Manually Set Memory on SW Band:
Tune to station you would like to program into memory.
Press Memo button, MEMO will ash in the LCD display.
Select page desired by using the PAGE button and Rotary
Tuning Knob. Display will ash and next available position on
display will ash if an available position is available. Press Enter
Selection button to assign frequency to ashing available position.
If memory is full no suggested position will ash and LCD will
display MEMO FULL when any button is depressed. If selected
button is held for more than 2 seconds, even with MEMO
FULL ashing. Newly selected station will replace existing station.
You may change or initiate any page name at any time by rst
selecting the page and then pressing the EDIT button and using
the Rotary Tuning Knob to place an alphanumeric character in the
name space in the LCD Display. Once a character is selected you
may move to the next position to place another character by
using the Tuning Up/Down button. When name is completely
entered press Enter Selection button.
Note:
You may change and edit your SW band’s pages names, but there
is no FM/MW/LW page name. You may change and edit your
FM/MW/LW bands’ preset names, but there is no any SW
preset name.
Note:
Every memory preset memory can be stored including
its frequency, mode (AM/LSB/USB), and ne tuning frequency.
22 23
GB
Loading ...
Loading ...
Loading ...