Loading ...
Loading ...
Loading ...
ENGLISH
17
ASSEMBLING AND PREPARING
Disconnect the power first, and then move or install the
TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it may fall
and result in severe injury.
Use an authorized LG wall mount and contact the local
dealer or qualified personnel.
Do not over tighten the screws as this may cause damage
to the TV and void your warranty.
Use the screws and wall mounts that meet the standard.
Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty.
CAUTION
Use the screws that are listed on the standard screw
specifications.
The wall mount kit includes an installation manual and
necessary parts.
The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
The length of screws may differ depending upon the wall
mount. Make sure to use the proper length.
For more information, refer to the manual supplied with the
wall mount.
You will need at least two people to remove the stand and one
more to separate the stand from the TV so it doesn’t fall when
the screws are removed.
When removing a stand, lay the TV on its back on a padded
table or surface. Do not put the TV face (front) down on the
table.
NOTE
Wall mount bracket (optional)
OSW100
LSW420BX
Removing a stand
(For 55EC9300)
1
2
(When attaching the stand)
Make sure that the screws are fastened tightly. (If they
are not fastened securely enough, the TV may tilt forward
after being installed.)
Do not tighten the screws with too much force; otherwise
they may be damaged and come loose later.
CAUTION
For more information about mounting on a wall, refer to the
OSW100 manual. (For 55EC9300)
When mounting the TV on a table, attach the stand by
performing the stand removal in reverse.
NOTE
3
When laying the TV on its back on a padded table or
surface, be careful to prevent the TV from being damaged.
CAUTION
Hanger
Screw for attaching
the hanger
Loading ...
Loading ...
Loading ...