Loading ...
Loading ...
Loading ...
en
7
Filling the salt dispenser
Salt must always be filled before the
appliance is switched on, so that excess
salt solution is immediately flushed away
to prevent corrosion.
Open the screw-type cap of the
compartment
24 .
Before using the appliance for the first
time, pour about 1 litre of water in the
salt container.
Then refill with salt (not cooking salt)
until the salt container is full
(max. 1.5 kg). When you refill the salt,
water is being displaced and drains off.
The LOW SALT indicator
6
on the front
panel will light up initially but will extinguish
again after a short period when the salt
solution has become sufficiently
concentrated.
If the switch is set to ”0”, it is not necessary
to add any salt, as none is consumed
while the dishwasher is operating. If the
switch is set between ”1” and ”3”, then salt
must be added.
Warning
Do not pour detergent into the container
for special salt. This would destroy the
water softener.
LOW SALT indicator
Salt should be added as soon as the LOW
SALT indicator
6
in the fascia panel
illuminates. For models that do not have
an indicator in the fascia panel, salt should
be added as soon as the coloured dot in
the lid on the salt container
24 is no
longer visible.
Depending on the washing frequency and
the hardness setting, the regeneration salt
may not have to be topped up for several
months.
Loading ...
Loading ...
Loading ...