Loading ...
Loading ...
Loading ...
8. Programmable Features
41
Setting flash time {#}{7}{2} The flash time depends on your telephone exchange or host PBX.
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “110ms”
{7} “100ms”
{8} “90ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Setting the Caller ID
number auto edit
feature
{#}{7}{5}{0} “OFF”
{1} “ON” (default)
See page 21 for details.
Setting the connecting
tone
{#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting
{#}{7}{7}{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 28)
{2} “FAX ONLY”: Fax only mode (page 27)
Resetting advanced
features to their default
settings
{#}{8}{0}{0} “NO” (default)
{1} “YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “YES”. i {SET} i {SET} i
{MENU}
Note:
L The ECM setting (feature #68 on page 40) will not be reset.
Feature Feature code Selection
FP215-PNQX1896ZA-OI-en.book Page 41 Tuesday, December 23, 2008 11:09 AM
Loading ...
Loading ...
Loading ...