Loading ...
Loading ...
Loading ...
33
SMART DIAGNOSIS™
Voice message Solution
Robot Cleaner Smart Diagnosis will be started. Please step
away and clear around 1 meter around the home station.
ft.m
Smart Diagnosis can start when it is being charged. Please
dock Robot Cleaner to the home station to charge.
No defect found during diagnosis.
Diagnosis mode cannot be operated due to a low battery.
Please try again after the battery is charged.
Please check if the dust bin is installed with the filter.
Charging cannot be done due to a problem in infrared
sensor.
Charging cannot be done due to a problem in ultrasonic
sensor.
Charging cannot be done due to a problem in the cliff
detection sensors on the bottom. Please clean the sensors.
Please wipe the lower camera sensor on the right bottom
of the Robot Cleaner.
Please wipe the obstacle detecting sensor window on the
left and right side of the Robot Cleaner.
A problem has been found on the Gyro Sensor.
Please check for dirt on the left wheel.
Please check for dirt on the right wheel.
A problem has been found on the left wheel sensor.
A problem has been found on the right wheel sensor.
Please check the brushes for obstructions.
A problem has been found in the suction motor.
A problem has been found in the acceleration sensor.
In order to listen to the Smart Diagnosis result again, please
press the charging button. To stop, please press the stop
button.
Smart Diagnosis mode will be turned off.
Please try Smart Diagnosis again after turning the main
power switch off and on from the back of Robot Cleaner.
If the problem continues, please contact LG Electronics
customer care.
Smart Diagnosis mode cannot be operated with mop plate
being attached. Please try again after removing it.
Smart Diagnosis has failed to operate. Please try it again
after turning off and on the main power switch on the back
of the Robot Cleaner.
Loading ...
Loading ...
Loading ...