Loading ...
Loading ...
Loading ...
EN
8
8
INSTALLATION
This hood is designed to be mounted on the ceiling/on a shelf, above a free-standing Hob (min. 650
mm), in:
• Ducting version: Evacuation to the outside.
• Recirculation version: Internal recirculation.
Warning: The F-Light hood is a system comprising hood + lamp, so that two separate electrical
wiring systems must be provided, one for the hood and one for the lamp.
The Zoom model is not fitted with a lamp.
Sequence of operations - Installation
• Preparing for installation
• Drilling the Ceiling/Shelf and Fixing the support plate
• Connections
• Fitting the hood body
• Functional Check
• Disposal of Packaging
Fitting the Limiter pawl
• Unfasten the 3 screw that join the parts of the Plate (of different shapes and/or sizes) using
the wrench provided.
• Take the Pawl and fix it to the plate on the bracket in the position indicated in the figure,
using the screw provided.
• Take the bulb holders and slot them onto the
brackets provided, which can be seen by
their fork-shaped ends.
Warning: the clamps used to fix the wires
must not be cut.
• Tighten the Screw fixing the bulb holders to
the bracket, in such a way as to hold the
latter between the 2 washers.
Loading ...
Loading ...
Loading ...