Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
REMOTE CONTROL
1. Mode Button: Used to choose the operating
mode.
2. Energy Saver Button: Used to set the energy
saver function.
3. Up and Down Arrows: Used to adjust the set
temperature in 1° increments and the timer
function in 30 minute increments up to 10 hours
and then in 1 hour increments up to 24 hours.
4. Default Button: Press to restore the remote
control default settings.
5. Lock Button: Press this button to lock the remote
control and prevent the settings from being
inadvertently changed.
6. Sleep Button: Used to set the Sleep function.
7. LED Button: Press to turn the LED back light on
or off.
8. Clock Button: Press and hold the button for
3 seconds in order to set the clock. Press the
Up and Down Arrows to adjust the time in 10
minute intervals
Note: The clock feature is only available on the
remote, the appliance does not have a clock. The
remote clock is a 24 hour clock only.
9. Cancel Button: Cancels current Timer settings.
10. Timer Button: Used to set the auto on and auto
off timer.
11. Fan Button: Used to set the fan speed. The fan
can be set to Low, Medium, High and Auto.
1
2
3
6
7
8
9
10
4
5
11
REMOTE CONTROL BATTERIES
The remote control requires two AAA alkaline
batteries (included). Batteries should be replaced
when:
a) No sound is heard when attempting to program
the appliance.
b) The appliance does not respond to a command
issued by the remote control.
Battery replacement:
1. Slide the rear cover on the remote in the
direction of the arrow.
2. Insert two AAA batteries following the same
orientation depicted inside the battery chamber
(+/-).
3. Reinstall the rear cover.
4. If the remote control will not be used for
extended periods of time, the batteries should be
removed.
Notes:
• Protect the remote control from high
temperatures, and keep it away from radiation
exposure.
• Keep the control panel receiver out of direct
sunlight.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh,etc) batteries.
• The remote operates within a range of 8 meters
(26 ft.) from the receiver located inside the main
appliance. Any obstruction between the receiver
and remote may cause signal interference,
limiting the ability to program the main unit.
Loading ...
Loading ...
Loading ...