Loading ...
Loading ...
Loading ...
4. Place a drain pan under the engine crankcase and remove the drain plug.
Allow the oil to drain completely.
5. Reinstall the sealing washer on the drain plug.
TIP
The sealing surfaces on drain plug and crankcase should be clean and free of
burrs, nicks or scratches.
6. Reinstall the drain plug. Torque to specification.
TORQUE
Drain Plug:
12 ft. lbs. (16 Nm)
7. Using a cap-style oil filter wrench, turn the filter
w
counter-clockwise to
remove it.
8. Using a clean dry cloth, clean the filter sealing surface on the crankcase.
Make sure the old filter o-ring is completely removed.
9. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to
make sure the o-ring is in good condition.
10.Install the new filter and turn by hand until the filter gasket contacts the
sealing surface, then turn an additional 3/4 turn.
95
MAINTENANCE
Loading ...
Loading ...
Loading ...