Loading ...
Loading ...
Loading ...
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle
equipment: switching on/off
manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1.
If necessary, tilt the controller to the side.
2. "Rear view camera"
The rearview camera image is displayed.
Functional requirements
▷ The trunk lid is fully closed.
▷ Keep the recording range of the camera
clear. Protruding cargo or carrier systems and
trailers that are not connected to a trailer
power socket can restrict the visibility range
of the camera.
Display on the Control Display
Function bars
The assistance functions can be activated man‐
ually via the function bars on the sides of the
Control Display.
Via iDrive:
1.
Move the Controller to the right, if needed.
2. With corresponding equipment:
"Camera image"
3.
▷ "Parking aid lines".
Pathway lines and turning radius lines are
displayed.
▷ "Obstacle mark.".
Depending on the vehicle equipment, the
obstacles detected by PDC Park Distance
Control are displayed by markings.
More than one assistance function can be active
at the same time.
Parking aid lines
Pathway lines
Pathway lines help you to estimate the space re‐
quired when parking and maneuvering on level
roads.
Pathway lines depend on the steering angle and
are continuously adjusted to the steering wheel
movements.
Seite 250
CONTROLS
Driver assistance systems
250
Online Edition for Part no. 01405A03D02 - II/20
Loading ...
Loading ...
Loading ...